|
Post by nonconformist on Sept 8, 2015 20:37:08 GMT
dashboll I forgot to put them in the tube hence the reason it was stuck on the outside I'll send you some more
|
|
|
Post by ninthsonv2 on Sept 8, 2015 22:33:25 GMT
Nonconformist - That piece of art is so effing clever, I wanted to buy a print. Lovely work mate.
Carry on.
|
|
|
Post by nonconformist on Sept 9, 2015 8:34:00 GMT
|
|
|
Post by Still Hate Thatcher on Sept 9, 2015 9:31:14 GMT
I like this more and more but I'm put off my the obvious pixelation in the 'Grease Jesus'. It doesn't ring true, which is a shame.
Have you considered perhaps doing an unlimited, receipt sized version?
|
|
|
Post by nonconformist on Sept 9, 2015 17:41:05 GMT
Still Hate Thatcher The image of Christ is actually on the rear of the print so what you actually see from the front is far more subtle. There are some single sided prints which may go on sale at some point in the future. A couple were sold before I decided to pull them. As for unlimited receipt size versions, these already exist in the form of stickers
|
|
|
Post by Still Hate Thatcher on Sept 9, 2015 18:59:14 GMT
I understand it's on the back and I wouldn't like a one side piece. I think the grease mark is integral. I probably need to see one.
|
|
|
Post by nonconformist on Sept 9, 2015 19:18:00 GMT
Still Hate Thatcher Saatchi image on here is a decent size. Its actually printed on receipt paper which is only 50 - 55 GSM any thicker, the bleed wouldn't have worked, too thin to run it through a giclee
|
|
|
Post by dashboll on Sept 12, 2015 17:30:41 GMT
Just got home and got mine, love it thanks nonconformistNice touch was a sticker of the print on the tube. I've peeled it off its flat but does have brown tube stuff on the back. Going to give it away, so like this post, and I'll draw in a few days. Just done the 3 way draw and it goes to IggyWiggy, PM your details and I'll send.
|
|
|
Post by IggyWiggy on Sept 12, 2015 17:35:38 GMT
Just got home and got mine, love it thanks nonconformistNice touch was a sticker of the print on the tube. I've peeled it off its flat but does have brown tube stuff on the back. Going to give it away, so like this post, and I'll draw in a few days. Just done the 3 way draw and it goes to IggyWiggy, PM your details and I'll send. Yayy! Many thanks! Sorry about all the abuse and shit.
|
|
|
Post by dashboll on Sept 12, 2015 17:37:10 GMT
I'll write "fuck you" over the front of it IggyWiggy
|
|
|
Post by IggyWiggy on Sept 12, 2015 17:38:44 GMT
I'll write "fuck you" over the front of it IggyWiggy Write it with your nob, then i won't be able to see it
|
|
|
Post by dashboll on Sept 12, 2015 19:34:06 GMT
I'll write "fuck you" over the front of it IggyWiggy Write it with your nob, then i won't be able to see it if you insist
|
|
|
Post by delloy on Sept 20, 2015 8:36:28 GMT
Like others here I'm still trying to decide how to frame this due to the receipt paper it is printed on and the image being dual sided.... tricky! I dont want to use any sort of adhesives or tape wheatstarch based or otherwise as this would more than likely ruin the paper and print. nonconformist You mentioned the piece you had framed by MFM was sandwiched between 2 pieces of glass. Does this mean the actual faces of the glass are in contact with the print? If so this also worries me somewhat as if ever needed to be removed I would be worried it would stick to the glass due to change in temperatures and humidity within the house when on the wall......or am I just overthinking this?
|
|
|
Post by dashboll on Sept 20, 2015 10:24:39 GMT
Like others here I'm still trying to decide how to frame this due to the receipt paper it is printed on and the image being dual sided.... tricky! I dont want to use any sort of adhesives or tape wheatstarch based or otherwise as this would more than likely ruin the paper and print. nonconformist You mentioned the piece you had framed by MFM was sandwiched between 2 pieces of glass. Does this mean the actual faces of the glass are in contact with the print? If so this also worries me somewhat as if ever needed to be removed I would be worried it would stick to the glass due to change in temperatures and humidity within the house when on the wall......or am I just overthinking this? I'm just framing my to show the front I think enough of the bleed comes through.
|
|
|
Post by nonconformist on Sept 20, 2015 11:22:15 GMT
delloy doesn't have to be sandwiched between the glass as the rear image bleeds into the front image due to the low GSM of the paper. It was really just something to make it stand out in the gallery. I've seen a few float mounted ones which look really good also
|
|
|
Post by nonconformist on Sept 20, 2015 11:25:11 GMT
delloy The front pane was musuem glass and the rear normal float glass so the heat from light should be dispersed. Like most prints etc... avoid sticking it over a radiator etc... I also think he sealed it like you would with a double glazing unit.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2015 13:20:25 GMT
Like others here I'm still trying to decide how to frame this due to the receipt paper it is printed on and the image being dual sided.... tricky! I dont want to use any sort of adhesives or tape wheatstarch based or otherwise as this would more than likely ruin the paper and print. nonconformist You mentioned the piece you had framed by MFM was sandwiched between 2 pieces of glass. Does this mean the actual faces of the glass are in contact with the print? If so this also worries me somewhat as if ever needed to be removed I would be worried it would stick to the glass due to change in temperatures and humidity within the house when on the wall......or am I just overthinking this? Just fold the print up and shove it in a giant sculpted wallet.
|
|
|
Post by delloy on Sept 20, 2015 14:13:12 GMT
dashboll How are you gonna mount it though? With tape or are you just hoping it will stay put behind a mount. Dont wanna put mine behind a mount as it will spoil the look of the receipt and I'm worried about tape damaging the paper as its so thin. I also considered Mylar corners but still not sure if it would be able to support its own weight due to the paper again nonconformist MFM sealed it liked a glazed unit? Im pretty sure it isnt unless hes got the proper equipment and dessicants to lower the dew point of air or gas in the cavity if not you will get condensation forming on the inside surface of the sealed unit when the outside temp of the glass changes and that is a definate no no Thanks for the input. Apologies for getting all technical
|
|
|
Post by dashboll on Sept 20, 2015 14:17:46 GMT
I'm just going to tape it delloy, it's what I do with all my pics, will probably regret it down the line but as long as it looks good on the wall it's better than being in a file. Agree it'll never hold behind a mount without something helping it. Someone needs to invent something!
|
|
|
Post by nonconformist on Sept 21, 2015 8:42:58 GMT
delloy that's what I'm guessing. Didn't have a proper chance to look at it as it was still in the wrapping when I dropped it off at Hang-Up. I'll do my copy the same. If it f*cks up, I'll send you another copy foc
|
|
|
Post by iamnotbanksy on Sept 28, 2015 2:03:54 GMT
Incredibly clever piece that I'm thrilled I picked up!! Thanks nonconformist ! Keep up the good work!
|
|
|
Post by iamzero on Sept 28, 2015 12:26:31 GMT
I've been really tempted with this since Nick Smith posted up his copy. Have I spent too much lately...
|
|
|
Post by dashboll on Sept 28, 2015 17:00:08 GMT
I've been really tempted with this since Nick Smith posted up his copy. Have I spent too much lately... it is rather good
|
|
|
Post by iamzero on Sept 28, 2015 17:31:30 GMT
I love it but I can't help thinking it would've had more impact on the wall if it was smaller if that makes any sense at all? I hate the 'buy or not to buy' thought.
|
|
|
Post by dashboll on Sept 28, 2015 18:24:05 GMT
I'd love to see it in a gallery in the same room as a traditioanal gilt framed last supper.
Hear you on size, not got mine up just yet so can't really comment
|
|